Front Brake Lever - Yamaha YFZ 50 2017 Owner's Manual

Engine speed limiter plate
When the engine speed limiter plate is installed,
engine speed is limited to 5200 r/min. When this
plate is removed, top engine speed (7500 r/min) is
available.
Remove the plate as follows.
1. Remove panel A. (See page 8-9.)
2. Loosen the screws, and then remove the
plate as shown.
2
1
1. Screw
2. Engine speed limiter plate
3. Tighten the screws.
4. Install the panel.
TIP
Store the engine speed limiter plate with the own-
er's manual so that it is readily available whenever
you want to reduce top engine speed.
EBU18392

Front brake lever

The front brake lever is located on the right han-
dlebar. To apply the front brake, pull the brake le-
ver toward the handlebar grip.
1. Front brake lever
4-5
1
4