Table of Contents
Advertisement
DVB-via-IP Server Settings
your model.]
[Available menu items are displayed on your TV screen.]
■
Preparations
Ensure the network connections and network settings are completed.
●
Functions > DVB-via-IP > DVB-via-IP server connection
Network > Network settings
Ensure that
Dual Tuner Mode
●
dual tuner model]
Watching > Tuning and editing channels > Auto Setup
■
DVB-via-IP Server Settings
Selects TV signal and enables tuning in DVB-via-IP server function.
1. Display the menu with MENU.
2. Select
Network
>
3. Select
DVB-S
/
DVB-C
Selectable TV modes for client vary depending on the channels stored.
●
Watching > Tuning and editing channels > Auto Setup
4. Select
Enable DVB-via-IP server
5. A confirmation screen is displayed and press
automatically restarts.)
Changing the default configuration may result in higher energy
●
consumption of the product.
LED turns to orange in Standby mode when this function is active.
●
= Note =
Dual tuner function (watching or recording 2 programmes simultaneously,
●
watching a programme while recording another programme, etc.) is not
available while using DVB-via-IP server function.
This function is not available when the TV is turned off with Mains Power
●
On / Off switch.
Due to network conditions or certain broadcaster restrictions, this function
●
may not be available.
is set to
DVB-via-IP Server Settings
/
DVB-T
and press
and press
- 250 -
[This feature is available depending on
On
in
LNB
Configuration.
and press
OK
OK
to set.
OK
to access.
OK
to set. (The TV
[Only for dual tuner model]
[Only for
to access.
Hide quick links:
Advertisement
Table of Contents
