Table of Contents
Advertisement
3) Follow the on-screen instructions.
– During the operation, remove USB devices other than the USB Flash
Memory used for this function.
Settings > Setup > Other Settings
■
Skip unwanted Analogue channels
You can hide (skip) unwanted channels. The hidden channels cannot be
displayed except in this function.
1. Select
Channel List
2. Select a channel.
3. Press
OK
to set
Reveal
:
Reveal
:
Hide
(skip)
To reveal all channels (if available)
●
(yellow)
■
Edit Analogue Channels
To swap / move the channel position (if available)
●
1) Press
(green) to edit.
2) Set the new position with
store.
To retune each channel
●
(red)
To rename the channel name
●
1) Press
(blue) to edit.
2) Enter characters (maximum 5 characters) with
Numeric
buttons, and press
3) Press
BACK/RETURN
= Note =
If a VCR is connected only with the RF cable in Analogue, edit VCR.
●
and press
OK
to access.
/
Hide
(skip).
Cursor buttons
(Manual
Tuning)
OK
to set.
to store.
- 118 -
and press
(green) to
Cursor buttons
or
Hide quick links:
Advertisement
Table of Contents
