3828W5A2622(O/M)¿
02.5.20 1:3 PM ˘ ` 10
SETTING CLOCK
When your oven is plugged in for the
first time or when power resumes after a
power cut, a '0' will be shown in the
display; you will have to reset the clock.
If the clock (or display) shows any
strange looking symbols, unplug your
oven from the electrical socket and plug
it back in and reset the clock.
During clock setting the colon will flash.
After setting, the colon will stop flashing.
You can set either 12 hour clock or 24 hour clock .
In the following example I will show you how to set the time
for 14:35 when using the 24 clock.
Make sure that you have removed all packaging from your oven.
Make sure that you have correctly installed
your oven as described earlier in this book.
Make sure that you have correctly installed
your oven as described earlier in this book.
1.Press STOP/CLEAR .
2.Press CLOCK once.
(If you want to use different option, Press CLOCK twice.
If you want to change different option after setting clock,
you have to unplug and plug it back in.)
3.Press 10 MIN fifteen times.
Press 1 MIN three times.
Press 10 SEC five times.
4.Press CLOCK to set the time.
The clock starts counting.
Operating Instructions
In the following example I will show you
10
QUICK START
how to set 2 minutes of cooking on high power.
1. Press STOP/CLEAR.
2. Press START four times to select 2 minutes on HIGH power.
Your oven will start before you have finished the fourth press.
During QUICK START cooking, you can extend the cooking time up to
10 minutes by repeatedly pressing the START key.
NOTE:The QUICK START feature allows you to
set 30 seconds intervals of HIGH power
cooking with a touch of the START key.
MICRO POWER COOKING
This function allows you to cook food for a desired
time. And in order to give you the best results, there
are 5 power level settings in addition to HI-POWER
because many food need slower cooking (at less than
HI-POWER).
Example:To cook food on 80% Power(Power8)
for 11 minutes .
1. Press STOP/CLEAR.
2. Press POWER twice to.
"640" appears on the display.
3. Press 10 MIN once.
4. Press START.
TWO STAGE COOKING
For Two Stage cooking, repeat power cooking steps 2
through 3 on the previous page before touching the
START pad for additional Time and Power program
you want to add.
Auto Weight Defrost can be programmed before the
first stage to defrost first and then cook.
select 80% power.
Press 1 MIN once.