Before Washing For The First Time; Water Hardness; Basic Settings - Asko DFI654B.AU Operating Instructions Manual

1. Water hardness

In order to achieve good dishwashing results, the dishwasher needs soft water (water with low mineral
content). Hard water leaves a white coating on dishes and the dishwasher.
Checking water hardness
Contact the local water utility to check the water hardness in your area. This is important with regard
to how much detergent and rinse aid to use.

2. Basic settings

Open the door and press the main power switch.
"Welcome to your new ASKO. This is a first time set up." is shown on the display. It is important
that you choose the right settings to ensure good dishwashing results.
Main power switch
Settings
1. Language
Select the language to be shown on the display.
2. Rinse aid 0/1/2/3/4/5
By using rinse aid you will improve your drying result. You will also achieve a better dishwashing
result with glassware and dishes.
Select rinse aid dosage. The rinse aid dispenser can be adjusted between 0 (Off) and 5 (High
dosage).
Pre-selected at factory: 5
Top up rinse aid
Press to open

Before washing for the first time

Select setting
Confirm setting
7