Table of Contents
Advertisement
Screenwash fluid level
Before doing anything under the bonnet of your
E-MEHARI, to top-up the screenwash fluid,
carry out the following operations in the order
indicated:
1. Park the vehicle in a safe place
2. Press and hold the brake pedal in this
position until you have switched off the
ignition
3. Apply the parking brake fully
4. Move the drive selector to position "N"
5. Switch off the ignition and remove the key
from the switch
6. Keep children and other persons away from
the underbonnet
7. Ensure that the vehicle is correctly
immobilised
Failure to follow the list of operations
above risks causing serious injury.
Always carry out the operations in the
order given and always observe the
safety recommendations.
To top-up the screenwash fluid: remove the cap
from the reservoir, place a funnel in the neck
of the reservoir and fill the reservoir up to the
"MAX" mark.
Maintenance
In low temperatures, use a screenwash
fluid with sufficient protection against
freezing.
Always be extremely vigilant when
filling the screenwash reservoir and
take account of the general safety
recommendations mentioned in this
handbook.
4
55
Advertisement
Table of Contents
