Table of Contents
Advertisement
3. Push the charging nozzle (2) into the
charging socket until it clicks in place.
4. Charging starts automatically. The
CHARGING indicator on the control unit
comes on to indicate that charging is in
progress.
Two signals indicate that the vehicle's battery
is charging:
-
The right-hand rear lamp flashes 5 times at
the start of the charge.
-
The connection indicator (green plug) in the
display screen flashes continuously.
Stopping the charge
1. Press the unlocking button on the back of
the charging nozzle then pull it out. The
charging nozzle disengages only if your
E-MEHARI has been unlocked using your
personal RFID key ring.
Get to know your E-MEHARI
2. Refit the protective cover on the charging
nozzle.
3. Disconnect the plug from the power point.
1
31
Advertisement
Table of Contents
