Table of Contents
Advertisement
2.Press the Exit button to confirm the selection.
Einstellungen
Temp.
Spin
Options
Change
Exit
B
All indicators in the display will appear in this language
from now on.
Note:
If the undesired language has been set, press
simultaneously Spin + Options buttons for about 3
seconds in order to change the language.
Follow the instructions as before.
SETTING THE TIME
You should set the time prior to the first wash and when
changing to and from daylight savings time.
See «Clock setting», Menu.
5. Select the desired
programme / fabric
Turn the selector dial, in order to select the desired
programme/fabric. The relevant message will appear in
the display.
The display will show the END CYCLE TIME of the
selected programme, calculated on the basis of the
maximum load for each type of fabric. The Start/Pause
button light will start flashing.
If the load of laundry to be washed is small, at the
beginning of the cycle the display will still indicate the
END CYCLE relevant to the maximum load. The
duration value will be gradually adjusted during the
execution of the cycle.
Off
Cottons
Cottons Economy
Synthetics
Delicate Spin
Delicates
Spin
Handwash
Drain
Wool
Rinse
Silk
Minipr. 30
Cotton
08.30
Cycle and at
10.55
90°C
1600
Options
Change
Exit
Temp.
Spin
6. Select the temperature
Press the Temp. button if you wish to select a
temperature value different from the one proposed by
the washing machine.
The message of the maximum available temperature
appears on the second row of the display (instead of
«cycle end at»). In the corner of the third row appears
the indication of the selected temperature.
COTTON
MAX 90°C
40°C
1400
Temp.
Spin
Options
Change
7.Select the Spin Speed "Spin",
the Rinse Hold
cycle
Press the Spin button repeatedly, in order to select the
desired spin speed or No Spin «
or the Night Cycle
message will appear on the second row of the display.
The selected spin level will be shown on the third row
next to the spin button.
If you select the Rinse Hold or Night Cycle options,
the machine will stop at the end of the programme with
the water still in the tub.
COTTON
MAX 1600
40°C
1200
Temp.
Spin
Options
Change
8. Select the desired options
Depress the relevant buttons to select the required
options.
Depending on the selected programme only certain
options are available and shown during the selection
phase.
14
08.30
10.55
Exit
or Night
O O
» or the Rinse Hold
options. The relevant
08.30
10.55
Exit
Advertisement
Table of Contents
