Table of Contents
Advertisement
My BERNINA Embroidery
Additionally, following embroidery formats can be read by the machine: .PES, .PEC, .XXX, .PCS, .JEF
and .DST. BERNINA International AG doesn't warrant that embroidery designs which have not been created
or converted by the BERNINA Embroidery software can be correctly read and embroidered.
Embroidery Test
For the embroidery test, always use the original material reinforced with the same stabilizer as will be used
later. For the embroidery test it is recommended to use the same colors, threads and needles which are
planned to be used for the embroidery project.
The Size of the Embroidery Design
Embroidery designs can be enlarged or downsized on the embroidery machine or on the PC using the
BERNINA Embroidery software (optional accessory). Scaling up/downsizing in a range of +/- 20 % provides
the best results.
Embroidering Designs by Third-party Providers
BERNINA recommends loading an embroidery design in any file format onto a USB stick via the free «ART-
Link» program. Using «ART-Link» ensures that the embroidery design can be read and embroidered
correctly. «ART-Link» can be downloaded for free at www.bernina.com/artlink.
Underlay Stitches
Underlay stitches are the foundation of a motif and are used to stabilize the base material and hold it in
shape. They also prevent the covering stitches of the motif from sinking into the knit or the nap of the
material.
Satin or Leaf Stich
The needle moves left to right and vice versa. The result is a very dense, covering zig zag stitching to fill the
shape. Satin stitching fills are ideal for narrow and small shapes. Satin stitching is, however, not suitable for
larger areas, since wide stitches are too loose and do not cover the fabric properly. In addition there is the
risk that with too long stitches the threads could catch on something which would damage the embroidery.
129
Advertisement
Table of Contents
