Table of Contents
Advertisement
Important Safety Instructions
Dangerous Voltage:
arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence
of dangerous voltage within the inside of the
a risk of electric shock to persons.
Instruction: The exclamation point within
an equilateral triangle is intended to alert the
user to the presence of important operating
and servicing instructions in the literature
accompanying the appliance.
1. Read these instructions completely before using the
equipment.
2. Keep these instructions in a safe place.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean with a soft, dry cloth.
7. Do not block any ventilation openings. Install the
equipment in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
heat.
9. Do not attempt to circumvent the safety
provisions of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third
grounding prong. The wide blade and the third prong are
into your outlet, consult an electrician for replacement of
the outlet.
10. Prevent the power cord from being tread upon or
pinched, particularly at the plug, convenience
receptacles, and the point where they exit from the
device. Be sure that the power outlet is located near the
equipment so that it is easily accessible.
by the manufacturer.
12. Use only with the cart, stand, tripod, bracket,
sold with the apparatus. When a cart is used,
use caution when moving the cart/ apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus when it will be unused for a long
period of time.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, or the unit does not operate normally, or
has been dropped.
USE
AC power Cord
Keep the following guidelines to protect the AC power cord
from being damaged. If the AC power cord is damaged, it
your dealer or ViewSonic service center to exchange it.
• Do not place the TV where the power cord is subject to
wear or abuse.
• Do not pinch, bend, or twist the cord excessively.
• The core lines may be bared and cut, causing a short-
• Do not convert or damage the power
cord.
• Avoid power cord being rolled over or
rested upon.
• When the power cord is plugged in, do
not move the TV.
• Keep the power cord away from heat sources.
• When you disconnect the AC power cord, disconnect it
• When disconnecting the power cord, grasp the plug instead
of pulling the power cord.
• Use only an original ViewSonic AC power cord, not other
brands.
• Do not use the supplied AC power cord on any other
equipment.
Wall outlet
Insert the plug fully into the outlet. If it is loose,
do not use it. Doing so may cause arcing and
change the outlet.
Wiring
For your safety, be sure to unplug the AC
power cord when connecting cables.
Take care not to trip on the cables. It may cause damage to
the TV set.
Electric shock
Do not touch the AC power cord or the TV with
a wet hand. If you plug/unplug the AC power
cord from the TV with a wet hand, it may
cause electric shock.
Lightning storms
During a lightning storm, unplug the TV from the wall outlet
and disconnect the antenna to prevent damage to the TV.
When not in use
If you will not be using the TV set for long periods of time,
the TV set should be disconnected from the AC power outlet
to prevent power line surges. The TV set is not disconnected
from the AC power source when the TV set is switched off.
To disconnect the TV set completely, unplug from the AC
power outlet.
Overloading
This TV set is designed to operate on a 120V
AC supply only.
If there are too many appliances connected to
the same AC power outlet, it could result in a
iv
Advertisement
Table of Contents
