Using The Projector; Connecting The Antenna Or Cable - LG HF80LA Owner's Manual

36

USING THE PROJECTOR

Connecting the Antenna or Cable

To watch TV using an indoor/outdoor
antenna, connect a wall terminal and the
antenna port of the projector using an RF
cable (75 Ω).
You can watch terrestrial or cable (analog,
digital) TV. (The RF cable is sold separately.)
NOTE
•
Make sure not to bend the copper wire of the RF
cable (75 Ω). Turn the input jack to the right to
fasten it.
•
Ensure you use a standard coaxial cable (75
Ω, sold separately) when connecting to the
projector input.
• For better image quality in locations where signal
strength is low, purchase and install a signal
amplifier (booster).
•
A signal splitter is required if you want to use two
or more projectors through one antenna.
• If you have any problems when installing the
antenna, please consult a suitable retailer or the
store where you purchased the antenna.
Copper wire