SEATS AND STEERING WHEEL
||
Closed front door
Hold one of the memory buttons 1 (
–
2 (
) depressed until seat, door mirrors
and head-up display stop in the positions
that are stored in the selected memory
button.
If the memory button is released, the move-
ment of the seat, door mirrors and head-up
display will be stopped.
WARNING
Because the driver's seat can be
•
adjusted with the ignition off, children
should never be left unattended in the
vehicle.
Movement of the seat can be STOP-
•
PED at any time by pressing any but-
ton on the power seat control panel.
Do not adjust the seat while driving.
•
Make sure there is nothing under the
•
seats when they are being adjusted.
NOTE
All driver profiles need to be set in
Profile
mode in order for the stored posi-
tions to work.
186
Related information
Manual front seat (p. 182)
•
) or
Power* front seat (p. 183)
•
Adjusting the power* front seat (p. 183)
•
Storing position for seat, door mirrors and
•
head-up display* (p. 184)
Adjusting massage settings* in the front
•
seat (p. 187)
Adjusting* the length of the seat cushion
•
in the front seat (p. 188)
Massage settings* in the front seat
•
(p. 186)
Adjusting the side support* in the front
•
seat (p. 189)
Adjusting the lumbar support* in the front
•
seat (p. 190)
Adjusting the passenger seat from the
•
driver's seat* (p. 191)
Angling adjustment of the door mirrors
•
(p. 172)
Settings for head-up display* (p. 142)
•
Protect
Massage settings* in the front seat
Both the multi-function control on the side of
the seat and the centre display can be used in
order to change the settings. The range of
settings is shown in the centre display.
Multi-function control, located on the side of the
seat's seating section.
Settings for massage
The following setting options are available for
massage:
On
Off
On
Off
/
: Select
/
in order to switch
•
on/off the massage function.
Programs 1-5
: There are 5 preset mas-
•
sage programs. Select between
Tread
,
Advanced
,
Lumbar
Shoulder
.
* Option/accessory.
Swell
,
and