4.4
Control Panel Description
Fig. 2
4.5
Standard Delivery
4.6
accessories & Options
7726858-01 (1/19)
4.4.1
User interaction Controller (Control Panel)
Key to symbols (Fig. 2)
Heating Water Temperature
Sweep Key and Status Signals
Reset button and On/Off Signal
1. The User Interaction Controller has 2 illuminating push
buttons which provide information about the operating condition
of the boiler.
2. The RESET button lights up green when the boiler has a
demand for CH or DHW.
3. The
button can flash in a range of colours and at
different frequencies.
4. The User Interaction Controller also has one rotary knob. The
rotary knob can be used to set the maximum flow
temperature of the heating water.
Maximum temperature is 80°C
5. The temperature on this rotary knob must be set to a higher
temperature than the cylinder thermostat to achieve the required
hot water demand.
1. The pack contains:
Boiler
Wall Fixing Bracket
Copper Tail (Gas Connection) and Fibre Washer
Top Flue Adaptor
Power Lead
Literature pack
• Installation & Servicing Manual (including 'benchmark')
• User Guide Instructions
• Flue Accessories & Fitting Guide
• Warranty Documentation
• System Additive Leaflet
• Wall Template
• Product Leaflet
• Package Leaflet
4.6.1
Optional Extras
1. Various items are available as optional extras.
Flue Accessories (elbows, extensions, clamps etc.)
(refer to the Flue Accessories & Fitting Guide supplied
in the literature pack.)
Remote relief valve kit
1M Condensate Drain Pipe 'Trace Heating' Element
2M Condensate Drain Pipe 'Trace Heating' Element
3M Condensate Drain Pipe 'Trace Heating' Element
5M Condensate Drain Pipe 'Trace Heating' Element
Description of the Product
600 Heat
4
21