USING THE FEATURES
Audio
Stereo / Dual Reception
- When a programme is selected, the sound information for the station appears after the programme
number and station name disappear.
On Screen Display
I/II
Press the
button to set NICAM mode
Broadcast
On screen Display
MONO
Mono
STEREO
Stereo
DUAL I
Dual
Mono Sound Selection
In stereo reception if the stereo signal is weak, you can switch to mono by pressing the
I/II
button twice. In mono reception the depth of sound is improved. To switch back to
I/II
stereo, press the
button twice again.
Language Selection for Dual Language Broadcast
If a programme received in two languages (dual language), you can switch to
DUAL II
DUAL I + II
or
by pressing the
DUAL I
•
sends the primary broadcast language to the loudspeakers.
DUAL II
•
sends the secondary broadcast language to the loudspeakers.
DUAL I + II
•
sends a separate language to each loudspeaker.
NICAM Reception (option)
• When NICAM mono is received, you can select
• When NICAM stereo is received, you can select
the stereo signal is weak, switch to FM mono.
• When NICAM dual is received, you can select
NICAM DUAL I + II, or MONO
appears on the screen.
Sound output selection
In AV, Component, RGB or HDMI mode, you can select output sound for the left and right
loudspeakers.
I/II
Repeatedly press the
button to select the sound output.
L+R
•
: Audio signal from audio L input is sent to left loud-speaker and audio signal from
audio R input is sent to right loud-speaker.
L+L
•
: Audio signal from audio L input is sent to left and right loud-speakers.
R+R
•
: Audio signal from audio R input is sent to left and right loud-speakers.
I/II
button repeatedly.
NICAM MONO
NICAM STEREO
NICAM DUAL I, NICAM DUAL II,
. When FM mono is selected the display
34
DUAL I
,
FM MONO
or
.
FM MONO
or
. If
MONO