Configuring Connection To The Internet - D-Link DSL-2500U Quick Installation Manual

DSL-2500U

Configuring Connection to the Internet

You should configure your WAN connection in accordance with data
!
provided by your Internet service provider (ISP). Make sure that you
have obtained all necessary information prior to configuring your WAN
connection. Otherwise contact your ISP.
1. Go to the Net / WAN page and click the Add button.
2. From the Connection Type drop-down list, select the needed value.
3. From the Port drop-down list, select the DSL(new) value.
4. Specify a name for your connection (any name for easier identification) in
the Name field.
5. In the ATM section, specify the VPI and VCI in the relevant fields, and
then select a method of encapsulation from the Encapsulation Mode
drop-down list.
Quick Installation Guide
10