Table of Contents
Advertisement
To save a call log entry to the directory:
.
When the desired call log entry displays, press SELECT.
2.
Use the dialing keys to modify the number, then press SELECT.
3.
Use the dialing keys to modify the name, then press SELECT to save.
To delete one call log entry:
•
When the desired call log entry displays, press DELETE.
To delete all call log entries:
•
Press MENU when the handset is not in use. Scroll to >CALL LOG and then
press SELECT. Scroll to >DEL ALL CALLS and then press SELECT twice.
About the answering system
The answering system can record up to 99 messages, depending on the length of
each message. The total recording time is approximately 4 minutes.
Answering system settings
Default settings are indicated by asterisks (*).
Screen display
CALL SCREENING
# OF RINGS
REMOTE CODE
MSG ALERT TONE
RECORDING TIME
Number of rings
You can set the answering system to answer an incoming call after 2, 3, 4, 5 or 6 rings;
or toll saver. If you choose toll saver, the answering system answers a call after 2 rings
when you have new messages, or after 4 rings when you have no new messages.
.
Press MENU when the handset is not in use.
2.
Scroll to >ANSWERING SYS then press SELECT.
3.
Scroll to >ANS SYS SETUP then press SELECT.
4.
Scroll to ># OF RINGS then press SELECT.
5.
Press
or
Answering system operation
Turn the answering system on or off
The answering system must be turned on to answer and record messages.
•
Press
/ANS ON/OFF on the telephone base to turn the built-in answering
system on or off.
Record your own announcement with a handset
You can use the preset announcement to answer calls, or replace it with your own
recorded announcement. It can be up to 90 seconds in length.
.
Press MENU when the handset is not in use.
2.
Scroll to >ANSWERING SYS and then press SELECT twice.
3.
The handset announces, "To play, press 2. To record, press 7." Press 7 to
record.
4.
The handset announces, "Record after the tone. Press 5 when you are done."
After the tone, speak towards the handset microphone. Press 5 when done.
5.
The answering system automatically plays back the newly recorded announcement.
Press 5 to stop the playback at any time; 2 to replay the recorded announcement;
3 to delete the recorded announcement; or 7 to record again if desired.
Message playback at the telephone base
/PLAY/
Press
Options during playback:
•
Press VOL or VOL to adjust the speaker volume.
/SKIP
•
Press
/REPEAT
•
Press
twice to listen to the previous message.
X/DELETE
•
Press
next message.
/
•
Press
PLAY
Function
Set whether you hear the callers while they are
leaving messages to you.
Set the number of times the telephone rings before
the answering system answers.
Set a two-digit security code to access the
answering system remotely from any touch-tone
telephone.
Set to alert you when you have new messages.
Set the recording time for each incoming message. 3 MINUTES*
to choose 2, 3, 4, 5, 6 or TOLL SAVER and then press SELECT.
when the phone is not in use.
STOP
to skip to the next message.
to repeat the message currently playing. Press
to delete the playing message. The system advances to the
/STOP
to stop.
8
Options
ON*
OFF
6; 5; 4; 3*; 2;
TOLL SAVER
19*
ON
OFF*
2 MINUTES
1 MINUTE
/REPEAT
Advertisement
Table of Contents
