Polaroid t833 User Manual page 45

3. If you select [Single] in the previous step, the
figure shown on the right hand side will appear.
Select the image that you want to print with
the / buttons.
Select the [Print Num] (up to 99) with the
buttons.
After selecting the desired image and printing
number, press the SET button to confirm.
4. Select [Exit] with the
SET button.
5. Select [Print] with the
the SET button to start printing.
6. The printing starts and the figure shown on the
right hand side appears.
[COMPLETE] will be displayed temporarily,
reminding you that the printing procedure is
finished.
If an error is detected during the connection
(i.e. the printer hardware problem) between
camera and printer, [PRINT ERROR] will be
displayed.
If an error is detected during the communication (i.e. wrong setting on the
camera) between camera and printer, [ERROR] will be displayed.
The image printing may fail if the power to the camera is cut off.
For service, support and warranty information visit www.polaroid.com.
"Polaroid" and "Polaroid and Pixel" are trademarks of Polaroid Corporation, USA.
EN-44
/ buttons, and press the
/ buttons, and press
/
001-0001
USB