Cooper Lighting INVUE VXS Specification Sheet

INVUE TM
VXS
VISION SITE
SMALL
4 2 - 1 7 5 W
M e t a l H a l i d e
H i g h P r e s s u r e S o d i u m
C o m p a c t F l u o r e s c e n t
A R C H I T E C T U R A L
A R E A L U M I N A I R E
• One-piece, die-cast
aluminum housing
• One-piece aluminum
die-cast door frame. Door
frame opens via release
of one flush mount
toolless latch
• One-piece extruded
rectangular 5" arm
• Optional Strut Rod and
Clevis set for pole mount
or wall mount
• Impact resistant 1/8" thick
tempered clear flat glass
• Ballast and related
electrical componentry
are mounted to a
reinforced one piece
galvanized steel tray with
integral handle
• Choice of five (5) high
efficiency segmented
optical systems
constructed of premium
95% reflective anodized
aluminum sheet
• Medium-base porcelain
socket for HID lamp
sources
• Approximate net weight:
35 lbs. (16 kgs.)
1100
COOPER LIGHTING
D E S C R I P T I O N
The classic lines and
sophisticated construction of the
Vision Site luminaire makes it an
ideal complement to site design.
The combination of smooth
contours and sharp rear reveals
allow the fixture to change
character from different viewing
angles while providing excellent
low-glare photometrics. U.L.
listed and CSA certified for wet
locations.
E P A - E f f e c t i v e P r o j e c t e d A r e a : S i n g l e 1 . 2 7 / S i n g l e S t r u c t u r a l 1 . 2 8
O R D E R I N G I N F O R M AT I O N
S A M P L E N U M B E R : V X S - 1 7 5 - M H - M T - 3 S - B K - P R C P S - L
Lamp Type
Product Lamp
MH=Metal
Family 1 Wattage
Halide
VXS=Vision Site HID 2
HPS=High
Small 70=70W
Pressure
100=100W
Sodium
150=150W
CF=Compact
175=175W
Fluorescent
Compact
Fluorescent 3
42=42W
57=57W 4
Structural Options 11
Pole Mount
PRCPS=Strut Rod and Clevis Set for
Square Poles
(Painted to match fixture) 12
PRCSS=Stainless Steel Strut Rod and
Clevis Set for Square Poles
(Clevis' painted to match fixture)
PRCPR=Strut Rod and Clevis Set for
Round Poles
(Painted to match fixture) 13
PRCSR=Stainless Steel Strut Rod and
Clevis Set for Round Poles
(Clevis' painted to match fixture)
Wall Mount
WRCP=Strut Rod and Clevis
(Painted to match fixture) 12
WRCS=Stainless Steel Strut Rod and
Clevis Set (Clevis' painted to
match fixture) 12
IP66 Rated 3G Vibration Tested
NOTE: 1 Arm not included. See accessories. 2 All HID lamps are medium-base. 3 Available in Type 3S, 4S, and 5S distributions only. 4 Nominal M.O.L lamp length of 57W
CFL not to exceed 7". 5 Compact Fluorescent ballasts contain internal fusing. No supplemental fusing is necessary. CF ballasts are 120 through 277V. Specify with
UNV voltage designation. 6 Products also available in non-US voltages and 50Hz for international markets. Consult factory for availability and ordering information.
7 Dual-tap is 120/277V wired 277V. 8 Multi-tap is 120/208/240/277V wired 277V. 9 Triple-tap is 120/277/347V wired 347V. 10 Custom and RAL color matching
available upon request. Consult your INVUE Lighting Systems Representative for further information. 11 Add as suffix in the order shown. 12 Structural options do
not include arm assembly (See Accessories). Compatible with 5" MA1071 arm only. 13 Structural options do not include arm assembly (see accessories).
Compatible with 5" MA1074 arm only. 14 Quartz options not available with SL optic. 15 Battery backup operates 90 minutes at minimum 32°F (0°C), 42W maximum.
Type 3S, 4S, 5S optics only. 16 House side shield not available on 5S and SL optics. 17 Order separately, replace XX with color suffix. 18 For use in down lighting
applications only. 19 Specifications and dimensions subject to change without notice.
D I M E N S I O N S
23" [584mm]
Voltage 6 Optical System
120=120V 2S=Type II
208=208V 3S=Type III
240=240V 4S=Type IV
277=277V 5S=Type V
347=347V SL=Spill Light
480=480V Eliminator
5 DT=Dual-Tap
Wired 277V 7
MT=Multi-Tap
Wired 277V
8
TT=Triple-Tap
Wired 347V 9
UNV=120-277V Universal
Electronic Ballast
Options 11 Accessories
F=Single Fuse (120, 277 or 347V) OA/RA1016=Photocontrol—Multi-Tap
Specify Voltage OA/RA1027=Photocontrol—480V
FF=Double Fused OA/RA1201=Photocontrol—347V
(208, 240 or 480V) MA1071-XX=5" Arm For Square Pole
Specify Voltage MA1074-XX=5" Arm For Round Pole
Q=Quartz Restrike 14 MA1073-XX=Direct Mount for Square Pole
12 EM=Quartz Restrike with Time MA1076-XX=Direct Mount For Round Pole
Delay (Also Strikes at Cold MA1077-XX=Wall Bracket with 5" Arm
Start) 14 MA1200-XX=Direct Wall Mount Kit
EM/SC=Quartz Emergency MA1101-XX=Single Arm Tenon Adapter for 2 3/8" O.D. Tenon
Separate Circuit 14 MA1102-XX=2 @ 180° Tenon Adapter for 2 3/8" O.D. Tenon
42CF/EM=Emergency Battery
MA1103-XX=3 @ 120° Tenon Adapter for 2 3/8" O.D. Tenon
13 Backup 15
MA1104-XX=4 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
PC=Button Type Photocontrol
MA1105-XX=2 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
(Specify Voltage)
MA1106-XX=3 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
HS=House Side Shield 16
MA1107-XX=2 @ 120° Tenon Adapter for 2 3/8" O.D. Tenon
VS=Polycarbonate Vandal
MA1108-XX=Single Arm Tenon Adapter for 3 1/2" O.D. Tenon
Shield
MA1109-XX=2 @ 180° Tenon Adapter for 3 1/2" O.D. Tenon
L=Lamp Included
MA1110-XX=3 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon
MA1111-XX=4 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1112-XX=2 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1113-XX=3 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1114-XX=2 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon
13 1/2" [343mm]
5" [127mm]
S T R U C T U R A L M O U N T
12 13/16"
[325mm]
26" [703mm]
Colors 10
Options &
(add as suffix/
Accessories
must specify)
(See Below)
BK=Black
AP=Grey
BZ=Bronze
WH=White
DP=Dark Platinum
GM=Graphite
Metallic
17
18
18
WATTAGE TABLE VXS
70, 100, 175W
Metal Halide
70, 100, 150W
High Pressure Sodium
42, 57W
Compact Fluorescent
6"
[152mm]