Installing The Px-755Sa Internal Sata Drive; Px-755Sa Drive Features And Controls - Plextor PX-755SA Installation And User Manual

2. Installing the
PX-755SA Internal SATA Drive
This section explains how to physically install your PX-755SA internal
Serial ATA drive in your computer. The steps are as follows:
1. Turn OFF your computer system.
2. Mount the drive into an available drive bay inside the computer
system.
3. Make the cabling connections: Serial ATA cable and power cable.
4. Turn your computer system ON.
The following pages give more details for this procedure.
NOTE: Your computer's SATA connection must support the ATAPI
command set. Some computer motherboards have SATA RAID
(Redundant Array of Independent Discs) chipsets that do not support the
ATAPI command set used by optical disc drives, or that do not have
BIOS settings to enable IDE/ATAPI functions. If you are unsure, consult
your motherboard manual or vendor web site for compatibility, BIOS
versions, and BIOS settings. And check the Plextor PX-755SA
motherboard compatibility listing at
http://www.plextor.com/english/support/support_compatability.html

PX-755SA Drive Features and Controls

Before proceeding, become familiar with the controls and features of
your Plextor drive. Match the parts of your drive to the illustrations
below.
9
PX-755SA Installation and Users Manual