Dell Inspiron 24 5420 Owner's Manual page 98

Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the back cover.
4. Remove the I/O cover.
5. Remove the hard drive.
6. Remove the system-board
7. Remove the media-card
8. Remove the fan.
9. Remove the memory module.
10. Remove the wireless card.
11. Remove the retractable-camera
12. Remove the M.2 2230 solid-state drive
13. Remove the integrated heat sink
14. Remove the system board.
15. Remove the speakers.
16. Remove the microphones.
17. Remove the stand hinges.
18. Remove the power-button board with
19. Remove the display panel.
About this task
The following image indicates the location of the base panel and provides a visual representation of the removal procedure.
Steps
After performing the pre-requisites, you are left with the mid-frame assembly with antennas.
NOTE: The mid-frame assembly with antennas consists of the following:
● Middle frame
● Base panel
● Wireless antennas (2)
98 Removing and installing Field Replaceable Units (FRUs)
Before working inside your
shield.
reader.
assembly.
or M.2 2280 solid-state
or discrete heat sink
USB.
computer.
drive, as applicable.