Samsung SM-N981B/DS User Manual page 70

Apps and features
Charging the S Pen
The S Pen must be charged before you can control apps remotely by using the S Pen button.
When you insert the S Pen into the slot, charging will start.
If the Air action feature is deactivated, the S Pen will be charged only when the device is
charging.
Air actions
Control apps remotely by using the S Pen connected to your device via Bluetooth Low Energy
(BLE).
For example, you can quickly launch apps, such as the camera app, by pressing and holding
the S Pen button. Also, while using the camera app, you can take a photo by pressing the
button once. While playing music, you can turn the volume up if you lift the S Pen up while
pressing and holding the S Pen button and turn the volume down if you lower it.
• The S Pen must be charged before you can use the Air actions feature. Refer to
Charging the S Pen
• When you detach the S Pen from the slot, the
bar. If the S Pen is discharged or far from the device, or if there are obstacles or
there is external interference between the S Pen and the device, the S Pen will be
disconnected from the device and the icon will turn gray (
feature again, connect the S Pen with the device by reinserting the S Pen into the
slot.
Taking photos with the S Pen
Even though you take photos with your device placing for a distance, you can easily take
photos by pressing the S Pen button without setting a timer.
1
Launch the Settings app, tap Advanced features → S Pen → Air actions, and then tap
the switch to activate the feature.
2
Launch the Camera app.
3
Press the S Pen button once to take a photo.
• To take a series of photos, press and hold the S Pen button.
• To change the shooting mode, move the S Pen to the left or right while pressing and
holding the S Pen button.
• To switch between cameras, press the S Pen button twice.
for more information.
70
icon will appear on the status
). To use the Air actions