Philips 32PF9968/10 Service Manual page 15

4.3.6 Small Signal Board (SSB)
Refer to next figure for details.
Caution: it is mandatory to remount all different screws at their
original position during re-assembly. Failure to do so may result
in damaging the SSB.
Refer to next figures or details.
1. Unplug the LVDS connector [1].
Caution: be careful, as this is a very fragile connector!
2. Unplug the connectors [2].
3. Remove the screws [3].
4. The SSB can now be taken out of the set, together with the
front shield and the side cover.
5. To remove the shield, remove the screws [4] and lift it of.
6. To remove the side cover remove the screw [5].
7. Pull the cover sidewards from the SSB.
3
2
(
4x
3
3
All manuals and user guides at all-guidesbox.com
1
)
Figure 4-11 Small Signal Board
Mechanical Instructions
3
3
4
4
3
Q522.1E LA 4.
3
3
4
4
3
I_17750_010.eps
250208
EN 15
5