Plantronics Tristar H81N Quick Start User Manual page 3

H81/N Final 9/17/02 4:44 PM Page 2
Use these steps to get set up quickly:
Capsule
1
Receiver
Housing
Capsule
Identify the
Components
Stabilizer
Cushion
Clothing
Clip
5
Examine
the Additional
Features
Clothing Clip
The clothing clip keeps the
headset properly seated and
free from the cord's weight.
Attach the clothing clip at a
comfortable level.
Quick Disconnect Connector
™
This feature allows you to place a
call on hold and move away from
the phone without removing the
headset. When you separate the
Quick Disconnect, you place an
ongoing conversation on hold.
Before using your headset,
join the Quick Disconnect to
the mating connector of the
modular adapter cable.
To disconnect, grasp Quick
Disconnect, as shown, and
pull straight apart. To resume your
conversation, reconnect the two halves.
See Maintenance and Troubleshooting section on the other side.
TRISTAR
®
FAMILY OF HEADSETS
Earbud Choices
H81
Standard
Model
Small and
Large Softip
Voice
Small and
Earbud Tube
Large Belltip
choice
goes here
Voice
Boom
Noise-Canceling
Microphone
H81N
Noise-Canceling
Model
4
TM
Quick Disconnect
Connector
For standard models:
4.1 Hold the receiver securely
against your ear with one hand.
4.2 With your other hand adjust
the voice tube so that the tip
sits two finger-widths from
the corner of your mouth.
To prevent breath noise, avoid
positioning the voice tube in
front of your mouth.
For Noise-Canceling
models:
4.3 Carefully bend and shape
the boom with both hands as
shown. Avoid bending or
twisting the boom near the
microphone or earpiece.
4.4 Position the boom so that
the microphone sits two finger-
widths from the corner of your
mouth.
4.5 Make sure the front of the
microphone faces your mouth. If
necessary, twist the microphone
slightly so it's in the proper
position. Do not use forceful
twisting motions or try to turn
the microphone completely
around.
Select one of the four earbuds
2
and insert it into the receiver,
aligning the pins with the
notches. Rotate the earbud
clockwise1⁄4 turn until it clicks
into place.
Find the Most
Comfortable
Earbud
Adjust the 4.1
Mouthpiece
4.2
2"
50.8 mm
4.3
4.4
Front Back
4.5
Then try all four
earbuds until
you find one
that comfortably
rests against, but
does not enter,
your ear canal.
3
Adjust the
Earpiece
3.1
For all models:
3.1 Grasp the earloop
and move the receiver
housing out as far as
possible.
3.2 Place the earloop
above and slightly
in front of your
ear and rotate
down and back.
3.2
3.3 Adjust the
receiver arm up and
down and side to side
until the earbud is
comfortably
positioned in
your outer ear.
3.3
The foam pad on the noise-canceling
earloop increases stability but may be
removed if uncomfortable.