BenQ MS527P User Manual page 43

Function
Monitor Out
Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the COMPUTER 1 jack is
correctly connected to devices. See
to make the connection.
Audio Pass Through
Standby
Press
Settings
mode. See
When the corresponding jacks are correctly connected to the device,
the projector can output an audio signal to the external speaker when
it is in standby mode. The built-in speaker(s) will be muted in standby
mode.
Returns all settings to the factory preset values.
Reset All
Settings
/ to choose the source that you wish to use in operation
"Connection" on page 15
Enabling this function slightly increases the standby power consumption.
The following settings will still remain: Keystone, User 1, User 2,
Reference Mode, 3D Color Management, Reset Picture Settings,
Projector Installation, Language, High Altitude Mode,
Security Settings, Baud Rate, Reset All Settings and
Current System Status.
Description
"Connection" on page 15
for how to make the connection.
for how
Operation 43