Integrated Ethernet Interface; Integrated Electrical Ethernet Interface - Siemens V9.50 Hardware Description

Technical Data

6.7 Integrated Ethernet Interface

6.7

Integrated Ethernet Interface

Integrated Electrical Ethernet Interface

6.7.1
Integrated Ethernet Interface (Port F)
This connection is used to load the device with DIGSI 5 via Ethernet. This terminal also enables IEC 61850
Ethernet communication or communication with another protocol via Ethernet, for example, for connecting
an external RTD unit.
Description
Connector type
Baud rate
Protocol
Max. line length
Interface design
Integrated Ethernet Interface
6.7.2
Integrated Ethernet Interface (Port F)
This connection is used to load the device with DIGSI 5 via Ethernet. This terminal also enables IEC 61850
Ethernet communication or communication with another protocol via Ethernet, for example, for connecting
an external RTD unit.
Interface
Connection
Connector type
Baud rate
Protocol
Max. line length
Insulation class
Interface design
Interface
Connector type
Wavelength
Baud rate
66
RJ45 connector, for Ethernet protocols via an electrical interface
RJ45
100 Mbit/s
See information below Integrated Ethernet Interface (Port F), Page 66
20 m with Ethernet patch cable CAT 6 S/FTP, F/FTP, or SF/FTP
Corresponds to IEEE 802.3, 100BaseTX
Integrated electrical Ethernet interface
(1) LED 1 Yellow
(2) LED 2: Green
2 x RJ45
100 Mbit/s
DIGSI 5 protocol (secure Web service protocol)
IEC 61850 (MMS and GOOSE)
Modbus TCP
DNP3
IEC 60870-5-104
20 m with Ethernet patch cable CAT 6 S/FTP, F/FTP, or SF/FTP
SELV (as per IEC 60255-27)
Corresponds to IEEE 802.3, 100Base-TX
Integrated optical Ethernet interface
2 x Duplex LC
λ = 1300 nm
100 Mbit/s
SIPROTEC 5 Compact, Hardware Description, Manual
C53000-G5340-C002-7, Edition 03.2023