Updategct - Planar Dome Md2/PCI Developer's Manual

UpdateGCT

UpdateGCT
Purpose Use
Syntax
DError (*UpdateGCT) (dev)
Parameter
Type
DMdDev
Return value
D_OK
Description
UpdateGCT()
current values in the GCT.
Errors
DMD_ERROR_BAD_DEVICE -
the GCT.
Example This example loads the GCT into the GCT hardware.
#include "domeMd.h"
DMdDev
DError
error = (*dev->UpdateGCT) (dev);
See also
WriteGCT, ReadGCT, InitGCT, DMdDev Structure
to load the GCT into the hardware.
UpdateGCT
UpdateGCT Parameters
Name
dev
if successful; otherwise, an error code.
updates the GCT hardware with the
dev;
error;
.
.
.
Description
Device handle of the DOME device
Device failed to access
103