Yamaha YFM700R Owner's Manual page 49

Fast compression damping force settings:
Minimum (soft):
2 turn(s) out from the fully turned in posi-
tion
Standard:
1.25 turn(s) out from the fully turned in
position
Maximum (hard):
Adjusting bolt fully turned in
Slow compression damping force
Turn the slow compression damping force adjust-
ing screw in direction (a) to increase the slow com-
pression damping force. Turn in direction (b) to
decrease the slow compression damping force.
(b)
1
1. Slow compression damping force adjusting screw
(a)
1
5-24
Slow compression damping force settings:
Minimum (soft):
18 click(s) in direction (b)
Standard:
10 click(s) in direction (b)
Maximum (hard):
1 click(s) in direction (b)
EWB00431
WARNING
This shock absorber assembly contains highly
pressurized nitrogen gas. Read and under-
stand the following information before han-
dling the shock absorber assembly.
 Do not tamper with or attempt to open the
cylinder assembly.
 Do not subject the shock absorber assembly
to an open flame or other high heat source.
This may cause the unit to explode due to ex-
cessive gas pressure.
 Do not deform or damage the cylinder in any
way. Cylinder damage will result in poor
damping performance.
5