Table of Contents
Advertisement
The system fan and heat sink be very hot. Before you open the chassis, turn off the computer and wait
several minutes until the computer is cool.
For access, do the following:
1. Remove the power adapter and cord. See "Power adapter and power cord" on page 53.
2. Remove the computer cover. See "Chassis" on page 55.
3. Disconnect the power cable from the system board.
Replacement steps
• 65-watt system fan
1. Release the system fan latch and lift the system fan up.
2. Loosen the heat sink screws and remove the heat sink with system fan.
64
ThinkStation P3 Ultra Hardware Maintenance Manual
Advertisement
Table of Contents
