Technical Data - Graco Magnum LTS 15 Repair Manual

Technical Data

Technical Data
Working pressure range
Electric Motor
Operating horsepower
Maximum delivery (with tip)
Paint hose
Maximum tip hole size
Weight, Sprayer only
Weight, sprayer, hose, & gun
Dimensions (Upright):
Dimensions (Folded):
Power cord
Fluid inlet fitting
Fluid outlet fitting
Inlet screen (on suction tube)
Generator requirement
Wetted parts, pump and hose
Wetted parts, gun
Electrical power requirement
Storage temperature range
Operating temperature range
Noise *
Sound pressure
Sound power
 When pump is stored with non-freezing fluid. Pump damage will occur if water or latex paint freezes in pump.
 Damage to plastic parts may result if impact occurs in low temperature conditions.
 Changes in paint viscosity at very low or very high temperatures can affect sprayer performance.
* Measured while spraying water-based paint, specific gravity 1.36, through a 517 tip at 207 bar, 20.7 MPa (3000
psi) per ISO 9614-2.
46
LTS 15
4.5A (open frame, universal)
1/2
1.02 lpm (.27 gpm)
6.4mm X 7.5 m
(1/4 in. x 25 ft)
0.015 in (0.38 mm)
5.4 kg (12 lb)
6.9 kg (15.2 lb)
Length 36.8 cm (14.5 in)
Width 31.5 cm (12.4 in)
Height 45.5 cm (17.9 in)
Length N/A
Width N/A
Height N/A
3/4 in. internally threaded
(standard garden hose)
1190 micron (16 mesh)
stainless steel, zinc plated carbon steel,
brass, ultra-high molecular weight polyeth-
ylene (UHMWPE), Carbide, Nylon, Alumi-
num, PVC, polypropylene, fluroelastomer
aluminum, brass, carbide, nylon, ultra-high molecular weight polyethylene
LTS 17
0-207 BAR, 0-21 Mpa (0-3000 psi)
5/8
1.17 lpm (.31 gpm)
6.4mm X 15 m
(1/4 in. x 50 ft)
0.017 in (0.43 mm)
10.6 kg (23.3 lb)
12.1 kg (26.5 lb)
49.0 cm (19.3 in)
38.9 cm (15.3 in)
94.0 cm (37.0 in)
49.0 cm (19.3 in)
38.9 cm (15.3 in)
74.2 cm (29.2 in)
1.0 mm², 3-wire, 1.8 m (6 ft)
1/4 npsm external thread
1500 Watt minimum
(UHMWPE), zinc
220-240V AC 50/60 Hz, I phase, 10A
-35° to 71° C (-30° to 160° F)
4° to 46° C (40° to 115° F)
85 dBa
95 dBa
ProLTS 19
6.5A (open frame, permanent
magnet DC)
7/8
1.44 lpm (.38 gpm)
0.019 in (0.48 mm)
15 kg (33.0 lb)
17.1 kg (37.7 lb)
54 cm (21.3 in)
38.9 cm (15.3 in)
93.2 cm (36.7 in)
54 cm (21.3 in)
38.9 cm (15.3 in)
75.7 cm (29.8 in)
7/8 - 14 UNF external thread
1680 micron (12 mesh)
stainless steel, zinc plated carbon
steel, brass, leather, ultra-high
molecular weight polyethylene
(UHMWPE), Carbide, Nylon,
Aluminum, PVC,
polypropylene, fluroelastomer
332695C