Bosch B1 RKM 15001 Instructions For Use Manual page 29

Separating the
flexible duct from
the indoor unit
13
1
2
14
Disconnecting the flexible duct
To pass the duct through a window frame or wall, it
must first be disconnected from the indoor unit. On
certain models, this can be done via fast
connection, proceeding as follows:
Unplug the appliance from the mains electricity
supply.
Remove the lower cover from the connection
area and the screws from the upper cover. The
flexible duct connection area can now be seen,
Fig. 13.
3
Remove the electrical connection by squeezing
the upper and lower tabs on the plug.
See Fig. 14.
2
Disassemble the condensed water drainage pipe
by turning it 90º in an anti-clockwise direction
and extracting, Fig. 15.
Push the fast connection lever down, Fig. 16.
Push the metal coupling fixture down, Fig. 17,
and pull the duct upwards at the same time,
Fig. 18.
15
1
2
29