Operation - Dometic CDF26 Operating Manual

Operation

7 Operation
7.1 Before initial use
I
NOTE
Before starting your new cooler for the first time, you should clean it
inside and outside with a damp cloth for hygienic reasons (please also
refer to the chapter "Cleaning and maintenance" on page 18).
7.2 Energy saving tips
•
Choose a well ventilated installation location which is protected against direct
sunlight.
•
Allow warm food to cool down first before placing it in the cooling device to
keep cool.
•
Do not open the cooling device more often than necessary.
•
Do not leave the cooling device open for longer than necessary.
•
Defrost the cooler once a layer of ice forms.
•
Avoid unnecessary low temperatures.
7.3 Connecting the cooler
!
WARNING!
•
Connect the device with the supplied DC cable only.
•
Do not modify the DC cable. Modifying the DC cable may cause
safety risks.
•
The DC cable must always be protected by 8 A fuse.
A
NOTICE! Danger of damaging the device!
Disconnect the cooler and other consumer units from the battery before
you connect the battery to a quick charging device.
Overvoltage can damage the electronics of the device.
➤ Plug the 12/24-V connection cable (fig. 1 2, page 2) into the DC voltage
socket and also into the cigarette lighter or a 12 V or 24 V socket.
12
CoolFreeze
EN