JVC Mini DV PAL GR-DVL307 Instructions Manual page 33

C. Connection to a TV or VCR equipped with an S-VIDEO IN and/or A/V input (RCA type) connectors
* When connecting the cables, open this cover.
Connector cover*
1
Make sure all units are turned off.
2
Connect the camcorder to a TV or VCR as
shown in the illustration (
If using a VCR . . . go to step 3.
If not . . . go to step 4.
3
Connect the VCR output to the TV input,
referring to your VCR's instruction manual.
4
Turn on the camcorder, the VCR and the TV.
5
Set the VCR to its AUX input mode, and set the
TV to its VIDEO mode.
NOTES:
● It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack
( pg. 7).
● When connecting the cables, make sure to connect the ends with a core filter to the camcorder. The core
filter reduces interference.
● To monitor the picture and sound from the camcorder without inserting a tape, set the camcorder's Power
Switch to " " or "
● Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the
camcorder is turned on.
● If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as
interference will occur in the camcorder playback picture.
● Set the video out select switch of the cable adapter as required:
Y/C : When connecting to a TV or VCR which accepts Y/C signals and uses an S-Video cable.
CVBS : When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.
Audio/Video cable
[mini-plug to RCA plug]
(provided)
Core filter
To AV
To S
Core
filter
pg. 32).
", then set your TV to the appropriate input mode.
When the S-Video
cable is not used.
Yellow to VIDEO IN
White to AUDIO L IN
Red to AUDIO R IN
S-Video cable
To S-VIDEO IN
(optional)
To choose whether or not the following displays
appear on the connected TV . . .
•Date/Time
.... set "DATE/TIME" to "ON" or "OFF" in the
Menu Screen (
•Time Code
.... set "TIME CODE" to "ON" or "OFF" in the
Menu Screen (
•Playback Sound Mode, Tape Speed And Tape
Running Displays
.... set "ON SCREEN" to "LCD" or "SIMPLE" in the
Menu Screen (
on the remote control (provided).
EN
TV
VCR
To TV or VCR
pg. 30).
pg. 30).
pg. 30). Or, press DISPLAY
33