Additional Information; Troubleshooting - Pioneer VSX-D912K Operating Instructions Manual

Audio/video multi-channel receiver
Hide thumbs Also See for VSX-D912K:
Table of Contents

Advertisement

11

Additional information

Chapter 11:
Additional information

Troubleshooting

Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is
something wrong with this component, check the points below. Sometimes the trouble may lie
in another component. Investigate the other components and electrical appliances being used.
If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest
Pioneer authorized service center or your dealer to carry out repair work.
Problem
The power does not turn on.
No sound is output when a
function is selected.
No image is output when a
function is selected.
Considerable noise in radio
broadcasts.
74
En
Remedy
• Connect the power plug to the wall outlet.
• Disconnect the power plug from the outlet, and insert again.
• Make sure there are no loose strands of speaker wire touching the
rear panel. This could cause the receiver to shut off automatically.
• If the STANDBY indicator blinks and the power shuts off
automatically, take the unit to your
service center or your dealer for servicing.
• Make sure the component is connected correctly (refer to Con-
necting up on page 16).
• Press MUTE on the remote control to turn muting off.
• Adjust the MASTER VOLUME.
• Make sure the component is connected correctly (refer to Con-
necting up on page 16).
• Select the correct component (use the MULTI CONTROL buttons).
• Tune in the correct frequency.
• Connect the antenna (refer to page 21).
• Route any loose cables away from the antenna terminals and
wires.
• Fully extend the FM wire antenna, position for best reception, and
secure to a wall.
• Connect an outdoor FM antenna (refer to page 21).
• Adjust the direction and position for best reception.
• Connect an additional internal or external AM antenna (refer to
page 21).
• Turn off the equipment causing the noise or move it away from the
receiver.
• Place the antenna farther away from the equipment causing the
noise.
nearest Pioneer authorized

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vsx-d912

Table of Contents