Listening In Dvd 5.1 Channel Input Mode - Pioneer VSX-D209 Operating Instructions Manual

Listening in DVD 5.1 Channel Input Mode

You can use this feature if you have a DVD player and a Dolby Digital decoder or a DVD player with a built-in
Dolby Digital decoder. Both these decoders will have separate analog audio outputs for the front left and right,
center, surround left and right, and sub-woofer channels. Connect these to the 5.1 channel inputs of the VSX-
D209 for enhanced playback of Dolby Digital material—see page 10 for instructions on connecting up. 5.1
channel mode of the VSX–D209 provides better surround-channel sound and overall channel separation than the
Dolby Pro Logic mode.
Follow the steps below to use the 5.1 channel mode.
SOURCE SELECT
SOURCE
DVD CD TUNER
TV CONT. TAPE MD CD-R
$ $ ! !
1 2 3 4
TV FUNC.
@ * & #
5 6 7 8
TV VOL. CHANNEL
EFFECT STATION
9 0
D. ACCESS CLASS
TOP MENU MENU
FQ
ENTER
TEST MPX
TONE SET UP
FQ
2
SORROUND DSP MODE MUTING
CH. SELECT LEVEL
FL MASTER
RECEIVER FUNCTION
DIMMER VOLUME
1
AV MULTI-CHANNEL RECEIVER
Î
REMOTE CONTROL UNIT
1
1 Use the FUNCTION button to select DVD 5.1
CH.
On the receiver, press the DVD 5.1 CH function button to select
the DVD input mode directly.
On the remote control, repeated presses of the FUNCTION button
switches between 5.1 channel input and the other inputs.
• You can input level settings spefically for the 5.1 CH mode
memo
and this will enhance you surround sound experience see
p.15).
• You can't use the tone controls S.BASS, or the DIRECT
function in 5.1 CH mode.
Listening in Surround Sound
21