Level +/– Buttons - Pioneer VSX-D209 Operating Instructions Manual

Setting Up for Surround Sound
Setting up speaker levels for DSP
SOURCE SELECT
SOURCE DVD CD
TV CONT. TAPE MD
$ $ !
1 2
TV FUNC.
@ *
5 6
TV VOL.
EFFECT
9 0
D. ACCESS
TOP MENU
FQ
ENTER
TEST
TONE
FQ
2
SORROUND DSP MODE
CH. SELECT LEVEL
3, 5,
FL
RECEIVER FUNCTION
DIMMER
7
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
16
1 Use the DSP MODE button to turn on a DSP
effect. You can cycle through the five
different types with the DSP button.
2 Play a source (CD, tape,etc.) and set master
TUNER
volume to a moderate level.
CD-R
!
3 Press the CH. SELECT button.
3 4
& #
7 8
The first speaker FL (front left) and it's relative volume level (+/-
CHANNEL
STATION
**dB) appears in the display.
CLASS
MENU
4 Adjust the front left (FL) speaker level with
1
MPX
SET UP the LEVEL +/– buttons.
MUTING
Adjust the volumes of the speakers to a standard level of your
4, 6,
choice when seated in your normal listening position.
MASTER 7
VOLUME
Î
5 Press CH. SELECT again to move to the next
speaker.
2
The second speaker CT (center) and it's relative volume level (+/-
**dB) appears in the display.
6 Adjust the center (CT) speaker level with the
LEVEL +/– buttons.
Adjust the volume of the speaker so its volume seems the same as
the previous speaker from your normal listening position.
7 Repeat steps 3 & 4 for all of your speakers.
Adjust the volumes of the all speakers so their volume seems the
same from your normal listening position.
memo
• These speaker level settings are applicable to DSP effects
only.
• Each effect level applies only to the DSP type (HALL for
example) that it is set in. You can set the effect levels for
each type independently.