Table of Contents
Advertisement
1886
Insert grommets found in the
holes in the blades, then secure each blade to a blade arm
with screws found in the
hardware bag.
Repeat x5
7
Ceiling Bracket
Downrod
Installing the Canopy
Lift the canopy into place so that
the screw holes are aligned.
Installing the Blades:
hardware bag into the
Hanging Fan
Insert the two canopy screws
found in the
Lightly attach the blade arms to the motor with
the blade arm screws, then securely tighten
after both screws are attached.
Wiring
Canopy
hardware bag.
bag
bag
bag
Note:
Fan style may vary.
Remember the screws that
you kept after removing the
shipping blocks? You need
them here.
Repeat x5
Note:
Fan style may vary.
Blades
Light
x2
Canopy Screw
Canopy
Screw
x15
Blade Screw
x15
Grommet
x10
Blade Arm Screw
Glass/Bulbs
Advertisement
Table of Contents
