Setup Instructions; Product Specifications - Intex 126368NP Owner's Manual

Frame pool set ultra quadra xtr 732 x 366 x 132 cm
Hide thumbs Also See for 126368NP:
Table of Contents

Advertisement

PRODUCT SPECIFICATIONS

The sand filter removes suspended particles but does not sanitize your pool. Pool chemistry
is a specialized area and you should consult your local pool service specialist for details.
Certified Model Number:
Power:
Wattage:
Ideal Salt Level:
Maximum Sanitizer Output/hour: 11 grams/hour
E.C.O. Cell Output Current:
Maximum working pressure:
Effective filtering area:
Pump flow rate (at pump outlet): 10.0 m
Recommended filtering
media quantity:
Recommended filtering
media (Not included):
Limited Warranty:

SETUP INSTRUCTIONS

TOOLS REQUIRED:
One (1) Phillips screwdriver
Pump location and mounting:
The system must be installed on a solid level and vibration-free base.
Provide a location protected from the weather, moisture, flooding and freezing
temperature.
Provide adequate access, space and lighting for routine maintenance.
Pump motor requires free circulation of air for cooling. Do not install the pump in a
damp or non-ventilated location.
A team of 2 or more people is recommended for setting up this product.
The appliance is intended only for household use.
Motor pre-filtering assembly setup:
1.
Remove the sand filter and its accessories from the packaging carefully and inspect for any
visible damage.
2.
In a counter-clockwise motion unscrew the leaf trap nut (14) from the pre-filter housing. Take
out the basket (16) and filter housing nut (17) (see drawing 10).
3.
Connect the pre-filter housing to the motor water inlet. Note: Align the connector in the
pre-filter housing with the water inlet on the motor (see drawing 11).
14
35
16
17
SAVE THESE INSTRUCTIONS
(345IO) SAND FILTER PUMP COMBO ENGLISH 7.5" X 10.3" PANTONE 295U 04/10/2022
ECO20220-2/ECO20230-2
220-240 Volt AC
520 W
3000 ppm (parts per million)
800mA
2 bar (30 psi)
2
2
0.13 m
(1.44 ft
)
3
/h (2650 GPH)
No. 20 silica sand 55 Kg (120 Lbs)
or glass sand 38 Kg (85 Lbs).
No. 20 silica sand or glass sand. Particle size range 0.45 to 0.85
mm (0.018 to 0.033 inches). Uniformity Coefficient less than 1.75.
see ʺLimited Warrantyʺ
10
English
ECO15220-2/ECO15230-2
220-240 Volt AC
300 W
3000 ppm
7 grams/hour
500mA
2 bar (30 psi)
2
2
0.1 m
(1.07 ft
)
7.9 m
3
/h (2100 GPH)
No. 20 silica sand 35 Kg (77 Lbs)
or glass sand 25 Kg (55 Lbs).
11
Page 8
345
A

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Qx2100Qx2600

Table of Contents