TP-Link Archer AC1900 User Manual page 25

Chapter 4
1. If you do not know what your internet connection mode is, contact your ISP or judge according to the already
known information provided by your ISP.
2. If your ISP provides two separate accounts for the IPv4 and IPv6 connections, manually enter the username
and password for the IPv6 connection.
3 ) In MAC Clone section, set the MAC address of your router. Use the default
address unless your ISP allows internet access from only a specific MAC
address.
4 ) Keep the default settings of LAN.
5 ) Click Connect
6 ) Go to Network > Status
connection.
Tips:
Visit the FAQ section if there is no internet connection.
then click SAVE to apply your settings.
to check whether you have successfully set up an IPv6
Set Up Internet Connection
21