Hanging The Fan - Hunter 51736 Installation Manual

Install the top housing screws. Install
the grounding screw in the smaller
screw hole. These screws can be
found in the
NOTICE
To prevent damage to fan,
ALWAYS lift holding the fan
housing.
Ceiling Bracket Hanging Fan
Installing the Top Housing
Grounding
Screw
bag
hardware bag.
8"

Hanging the Fan

Raise the fan and align the slots in the
canopy with the hooks on the ceiling plate.
Note: To hang the fan, you must tilt the canopy to
an almost vertical position so that the canopy slots
sit on the ceiling plate hooks.
Wiring Canopy
x3
Top Housing
Screw
Grounding
Screw
Blades Light
3/8"
8"
The wires can be cut, but
leave at least 8" extending
from the top of the canopy.
Place the slots over the ceiling
plate hooks to hang the fan.
Bulbs Remote
1886
3/8"
4