Dometic RM 10.5S Installation Manual page 27

RM10.5(S)(T), RMS10.5(X)(S)(T)
Item in fig. k, page 11
1
2
3
2. Have a leak test and a flame test performed by an authorized specialist after pro-
fessional installation.
Ensure you are issued with a certificate of inspection and hand this certificate to
the end user for safekeeping.
5.2 Connecting to DC and AC
!
WARNING! Failure to obey these warnings could result in death
or serious injury. Electrocution hazard
The electrical installation and repairs may only be performed by a
specialist in accordance with the applicable national regulations and
standards.
I
NOTE
• The device plug must not be placed directly behind the ventilation
grille in order to prevent the air circulation from being impaired and
to protect the device plug from splashes of water.
• The device plug of the AC connection cable must not be cut off.
• The connection cables must be laid so that they do not come in con-
tact with hot parts of the unit/burner or with sharp edges.
• Changes to the internal electrical installation or the connection of
other electrical components (e.g. extra third party fans) to the inter-
nal wiring of the refrigerator will void any claims from the guarantee
and product liability.
• The refrigerators RM10.5 and RMS10.5 have a CI bus interface and
can be controlled through a compatible central vehicle display.
EN
Description
Screw M4 (Torx TX20),
Tightening torque: 2 Nm
Refrigerator gas connection:
M14 x 1.5 (d = 8 mm/ISO 8434 (DIN 2353))
Gas pipe with ring coupling (size 17),
Tightening torque: 25 Nm
Connecting the refrigerator
27