Selecting Audio Output - Pioneer XDV-P6 Operation Manual

Section
Playing DVD video discs
06
! Chapter search and time search are not possi-
ble when disc playback has been stopped.
! Even without using an information display you
can start playback from a specified title or
chapter. For details, refer to Specifying title on
page 19 and Specifying chapter on page 19.
Selecting audio, subtitle and angle
You can perform audio (language, stereo,
audio type as Dolby Digital etc.), subtitle lan-
guage and angle selection.
1 Move the joystick left or right to select
a desired option.
The selected option is highlighted.
2 Move the joystick up or down to switch
to the desired setting.
This switches you to the selected setting.
For Audio
Selection options switch as follows:
Audio 1—Audio 2—Audio 3
For Subtitles
Selection options switch as follows:
Subtitles 1—Subtitles 2—Subtitles 3
For Angle
Selection options switch as follows:
Angle 1—Angle 2—Angle 3
Notes
! The number of switching options depends on
how many options are recorded on the DVD.
! You can switch audio, subtitle and angle dur-
ing playback using the respective buttons.
! Display indications such as Dolby D and
5.1ch indicate the audio system recorded on
the DVD. Depending on the setting, playback
may not be with the same audio system as
that indicated.
22
En
Selecting repeat range
You can choose between repeat play of a disc,
title or chapter.
1 Press DISP to switch to the information
display 2.
2 Move the joystick left or right to select
the repeat range option.
The repeat range option is highlighted.
3 Move the joystick up or down to switch
to the desired setting.
This switches you to the selected setting.
! Disc – Repeat the current disc
! Title – Repeat just the current title
! Chapter – Repeat just the current chapter
Note
Certain DVD discs display a menu upon comple-
tion of repeat playback.

Selecting audio output

You can switch between stereo and monaural
audio output.
1 Press DISP to switch to the information
display 2.
2 Move the joystick left or right to select
the audio option.
The audio option is highlighted.
3 Move the joystick up or down to switch
to the desired setting.
This switches you to the selected setting.
! L+R – Left and right
! L – Left
! R – Right