Adjusting the Screen Image
Use the buttons on the front control panel to display and adjust the on-screen OSD
control settings.
Standby Power On/Off
Power light
Blue = ON
Flickering = Power Saving
Displays the Main Menu or exits the control screen and saves
[MENU]
adjustments.
Displays the control screen for the highlighted control.
[AUTO]
Also a shortcut to toggle analog and digital connection.
Scrolls through menu options and adjusts the displayed control
◄/►
settings.
Audio adjust (◄) / Contrast (►)
Do the following to adjust the display setting:
1. To display the Main Menu, press button [MENU].
NOTE: All OSD menus and adjustment screens disappear automatically after
about 15 seconds. This is adjustable through the OSD timeout setting in the
setup menu.
2. To select a control to adjust, press
Menu.
3. After the desired control is selected, press button [AUTO].
4. To save setting adjustments and exit the menu, press button [MENU] until the
OSD disappears.
The following tips may help you optimize your display:
• Adjust the computer's graphics card to support a recommended timing mode
(refer to "Specifications" page for recommended setting specific to your
To find instructions on "changing the refresh rate", please refer to the graphics
card's user guide.
• If necessary, make small adjustments using H. POSITION and V. POSITION
until the screen image is completely visible.
of the screen should barely touch the illuminated "active area" of the display.)
►
or
◄
to scroll up or down in the Main
(The black border around the edge
6
display).