Connecting The Units - Pioneer DEH-P800PRS Installation Manual

Connecting the Units

Connection diagram for standard mode with internal amp
Antenna jack
DSP switch
This product
Switch the DSP switch as
illustration below.
Power cable
(For details, refer to Fig. 2.)
Left
FL + FR +
+ +
Front speaker
≠ ≠
FL – FR –
RL + RR +
+ +
Rear speaker
≠ ≠
RL – RR –
Connecting cords with RCA pin
plugs (sold separately)
23 cm (9 in.)
Subwoofer output
(LOW/SUBWOOFER
OUTPUT)
System remote control
Blue/white
To system control terminal of the power amp or
Auto-antenna relay control terminal (max. 300
mA 12 V DC).
Right
Front speaker
+ +
Subwoofer Subwoofer
≠ ≠
Rear speaker
Perform this connection when using the optional amplifier.
Connection diagram for standard mode without internal amp
Note:
• If using this system, we recommend that this unit's internal amp is turned off.
For more details, refer to operation manual.
Power amp
(sold separately)
Antenna jack
This product
Power cable
(For details, refer to Fig. 2.)
Fig. 3
23 cm (9 in.)
Subwoofer output
(LOW/SUBWOOFER
15 cm (5-7/8 in.)
OUTPUT)
Rear output
(HIGH/REAR OUTPUT)
15 cm (5-7/8 in.)
DSP switch
Front output
Switch the DSP switch as
(MID/FRONT OUTPUT)
illustration below.
Blue/white
To system control terminal of the power amp or
Auto-antenna relay control terminal (max. 300
mA 12 V DC).
Speaker leads
Not used.
FL + FR +
FL – FR –
RL + RR +
RL – RR –
<ENGLISH>
Connecting cords with RCA pin
plugs (sold separately)
Power amp
(sold separately)
Power amp
(sold separately)
Power amp
(sold separately)
System remote control
Left
Right
+ +
Front speaker
Front speaker
≠ ≠
+ +
Rear speaker Rear speaker
≠ ≠
+ +
Subwoofer Subwoofer
≠ ≠
Fig. 4