Table of Contents
Advertisement
20
use
Cancelling the delayed start:
set the washing machine to PAUSE by pressing the button
●
press the button
●
press the button
●
The DELAY START option can not be selected with DRAIN programme
Altering an option or a running programme
It is possible to change any option before the programme carries it out. Before
you make any change, you must pause the washing machine by pressing the
7
button
.
Changing a running programme is possible only by resetting it. Turn the
programme selector dial to O/OFF and then to the new programme position.
The washing water in the tub will be not emptied out. Start the new programme
by depressing the button
Interrupting a programme
Depress the button
corresponding light starts to flash. Depress the button again to restart the
programme.
Cancelling a programme
Turn the selector dial to O/OFF to cancel a programme which is running. Now
you can select a new programme.
Opening the door after the programme has started
First set the machine to pause by pressing the button
if the DOOR symbol disappears, the door can be opened.
●
if the DOOR symbol doesn't go off, it means that the machine is already
●
heating, that the water level is above the bottom edge of the door. In this
case the door can not be opened.
If you cannot open the door but you need to open it, you have to switch the
●
machine off by turning the selector dial to O/OFF. After some minutes the
door can be opened (pay attention to the water level and
temperature!).
8
until the symbol
7
again to start the programme.
7
again.
7
to interrupt a programme which is running, the
0'
is displayed;
7
.
7
;
.
Advertisement
Table of Contents
