Download Print this page

Pioneer Premier DEH-P500UB Installation Manual page 2

Pioneer deh-p500ub: install guide
Hide thumbs Also See for Premier DEH-P500UB:

Advertisement

Available languages

Available languages

Connecting the unit
English
When not connecting a rear speaker lead to a subwoofer
1.5 m (4 ft. 9 in.)
20 cm
(7-7/8 in.)
50 cm (20 in.)
USB cable
Connect to separately sold USB device.
This product
Rear output
iPod
Front output
Wired remote input
Hard-wired remote control
Antenna jack
adaptor can be connected
(sold separately).
Subwoofer output
Fuse (10 A)
IP-BUS input (Blue)
Dock connector
Interface cable
IP-BUS cable
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by
Yellow/black
ignition switch (12 V DC).
If you use an equipment with Mute function,
wire this lead to the Audio Mute lead on that
Orange/white
equipment. If not, keep the Audio Mute lead
Connect to lighting switch terminal.
free of any connections.
Black (chassis ground)
Connect to a clean, paint-free metal location.
White
Gray
Front speaker
White/black
Gray/black
Left
Green
Violet
Rear speaker
Green/black
Violet/black
With a 2 speaker system, do not
connect anything to the speaker leads
that are not connected to speakers.
Connecting the unit
AUX jack (3.5 φ)
Use a stereo mini plug
To rear output
cable to connect with
Connect with RCA cables
auxiliary device.
(sold separately)
To front output
To subwoofer
output
Multi-CD player
(sold separately)
System remote control
Blue/white
Connect to system control terminal of the power
amp or auto-antenna relay control terminal (max.
300 mA 12 V DC).
Perform these connections
when using the optional
amplifier.
Front speaker
Subwoofer
Right
Rear speaker
Front speaker
Rear speaker
English
Connecting the unit
When using a subwoofer without using the optional amplifier
50 cm (20 in.)
Power amp
(sold separately)
Power amp
iPod
(sold separately)
Power amp
(sold separately)
Dock connector
Interface cable
Yellow/black
If you use an equipment with Mute function, wire this lead to the Audio
Mute lead on that equipment. If not, keep the Audio Mute lead free of
any connections.
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by ignition switch (12 V DC).
Orange/white
Subwoofer
Connect to lighting switch terminal.
Black (chassis ground)
Front speaker
Connect to a clean, paint-free metal location.
Note:
Change the initial setting of this unit.
Rear speaker
The subwoofer output of this unit is monaural.
English
Connecting the unit
1.5 m (4 ft. 9 in.)
20 cm
(7-7/8 in.)
USB cable
AUX jack (3.5 φ)
Connect to separately sold USB device.
Use a stereo mini plug
cable to connect with
This product
Rear output
auxiliary device.
Wired remote input
Front output
Hard-wired remote control adaptor can
be connected (sold separately).
Antenna jack
Subwoofer output
IP-BUS input (Blue)
Fuse (10 A)
Multi-CD player
IP-BUS cable
(sold separately)
English
Blue/white
Connect to system control
terminal of the power amp or
auto-antenna relay control
terminal (max. 300 mA 12 V DC).
White
Gray
Front speaker
Front speaker
White/black
Gray/black
Left
Right
Green
Violet
Subwoofer (4 Ω)
Subwoofer (4 Ω)
Green/black
Violet/black
When using a subwoofer of 70 W (2 Ω), be sure to connect
with Violet and Violet/black leads of this unit.
Do not connect anything with Green and Green/black leads.
Green
Violet
Subwoofer
Not used.
(4 Ω)  2
Green/black
Violet/black

Hide quick links:

Advertisement

loading