Battery Information - Uniden XDECT 8105 Owner's Manual

Do you have the base the HS is registered to?
1. Press & hold END and # until
the System Reset menu appears
(about 5 seconds).
2. Select Deregister HS. The display
lists all registered handsets.
3. Select the HS you want to reset.
4. 4. When the phone asks you to
confirm, select Yes. The HS clears
its information from the base &
deletes it own link to the base.
IMPORTANT INFORMATION
1. All features and operation for the handset are described in the owner's
manual for the base.
2. Owner's Manual for all Uniden phones are available on our website for
free downloading.
AC Adaptor
Parts Number
AAD-600S(M)

Battery Information

Type
BT-694 or 650mAh or 500mAh
BT-694s or 400mAh
BT- 694n
•
Use only the supplied AC adaptors.
•
Use the proper adaptor for the base and any chargers.
•
Do not place the unit in direct sunlight or subject it to high
temperatures.
•
Replace the battery when the talk or standby time becomes
noticeably reduced. For replacements, visit the online shop on our
website (see the front cover).
•
When the battery gets low, the handset beeps and shows a low
battery alert; put the handset in the cradle for recharging.
6
Yes
Input Voltage
100-240V AC, 50/60Hz
Capacity
1. Press & hold END and # until
the System Reset menu appears
(about 5 seconds).
2. Select Base Unavailable.
3. When the phone asks you to
confirm, select Yes. The handset
deletes its own link without
contacting the base.
9V DC @ 210mA
Talk time
about 10 hours
No
Output Voltage
Standby Time
about 7 days