Table of Contents
Advertisement
Specifications
AC Adapter
Battery pack
Use only the supplied AC adapter.
Be sure to use the proper adapter for the base and any chargers.
Do not place the power cord where it creates a trip hazard or where it could
become chafed and create a fire or electrical hazard.
Do not place the unit in direct sunlight or subject it to high temperatures.
Battery Information
Fully charged, the battery should provide about 8 hours of talk time and about 7
days of standby time. For best results, return the handset to the cradle after each
call to keep it fully charged.
Keep an eye on the battery status icon. When the battery gets too low, the
handset shows a low battery alert. If you hear a strange beep during a call, check
the display: if you see the low battery alert, finish your conversation as quickly as
possible and return the handset to the cradle. If the handset is in standby, none of
the keys will operate.
With normal use, the battery should last about one year. Replace the battery
when the talk time becomes short even when the battery is charged. To buy a
replacement battery, visit our website for contact information.
Replace the Rechargeable Handset Battery Pack
Follow these steps to replace the battery:
1)
Unscrew the four screws holding the battery cover and remove it.
2)
Remove the old battery pack from the battery compartment.
3)
Line up the new battery's connector with the jack inside the battery
compartment (the connector only fits one way).
4)
Push the connector in firmly. Tug on the battery wires gently to make sure you
have a good connection.
Part number
AAD-600S(M)
Part number
BT-694s
Input Voltage
240V AC, 50 Hz
Capacity
500mAh, 2.4V DC
5
Output Voltage
9V DC@ 210mA
Advertisement
Table of Contents
