Features and Accessories
Table 1. Standard Features
•
MULTI-POSITION UPFLOW, DOWNFLOW, HORIZONTAL LEFT
AND HORIZONTAL RIGHT
•
PAINTED FINISH ON GALVANIZED STEEL EXTERIOR WITH
FULLY INSULATED CABINET THAT MEETS 4.0 R VALUE.
BLOWER COMPARTMENT INSULATION IS ONLY INSTALLED
IN B, C AND D SIZE PRODUCTS AND HAS A 2.1 R VALUE
•
120 VAC OPERATION
•
VARIABLE SPEED DIRECT DRIVE BLOWER
•
SIDE AND BOTTOM RETURN
•
MEETS THE MINIMUM LEAKAGE REQUIREMENTS FOR THE
FLORIDA AND CALIFORNIA BUILDING CODES
•
THESE MODULAR BLOWERS ARE APPROVED FOR
INSTALLATION IN MANUFACTURER/MOBILE HOUSING.
•
THIS FURNACE MUST BE INSTALLED IN ACCORDANCE WITH
THE MANUFACTURER'S INSTRUCTIONS AND THE
MANUFACTURED HOME CONSTRUCTION AND SAFETY
STANDARD, TITLE 24 CFR, PART 3280 OR WHEN SUCH
STANDARD IS NOT APPLICABLE, THE STANDARD FOR
MODEL MANUFACTURED HOME INSTALLATION, NFPA 225,
OR THE CANADIAN STANDARD FOR MANUFACTURED
HOMES, CSA Z240 MH.
Table 2. Accessories
Model Number
BAYHANG
BAYLIFTB
BAYLIFTC
BAYLIFTD
BAYFLTR206
BAYSF1165AA
(a)
BAYSF1255BA
FLRSF1255
BAYFLTR203
BAYFLTR204
BAYFLTR205
(a)
Airflow greater than 1600 CFM requires dual returns
Parts List
•
Blower Motor
•
Blower Wheel
•
IMBC (Integrated Modular Blower Control)
4
Description
Horizontal Hanging Kit
Dual Return Kit (B size extension)
Dual Return Kit (C size extension)
Dual Return Kit (D size extension)
Filter Access Door Kit (Downflow only)
1" SlimFit Box with MERV 4 Filter
1" SlimFit Filter and Insulated Frame
1" Filter replacement (Qty 12)
Horizontal Filter Kit
Horizontal Filter Kit
Horizontal Filter Kit
Use with
All modular blowers
B Cabinet modular blowers
C Cabinet modular blowers
D Cabinet modular blowers
All modular blowers in Downflow orientation
All modular blowers
All modular blowers when used in side return
application
B Cabinet modular blowers only when in
bottom return application
BAYSF1255BA
B Cabinet modular blowers in Downflow/
Horizontal
C Cabinet modular blowers in Downflow/
Horizontal
D Cabinet modular blowers in Downflow/
Horizontal
P0V0-SVX001-1A-EN