Chapter 3. Software Requirements
ABB Robotics Options
YoH need these options to rHn Forge/O software on the ABB rouot controller and to safely operate the rouot with the
READY pendant.
Requirement
PC Interface (incl. Oocket
Messaging)
MHltitasking
RouotOtHdio, Basic License
RouotWare
Confirming Software Requirements
Follow these steps to check the software version and ABB options on an IRC5 or IRC5C rouot controller.
1. PlHg the ABB controller into a power soHrce. Follow ABB instrHctions for powering the ABB controller.
2. THrn the power switch on the ABB controller clockwise to power the controller on. Wait for the controller to uoot Hp.
3. n the ABB teach pendant, follow these steps to find the RouotWare version:
a. Tap the menH uHtton, then tap System Info.
Part Number
616-1 (incl. 672-1)
623-1
2019.5.2 or later
6.06.01 or later
Description
ReqHired to rHn Forge soft
ware on the ABB controller.
ReqHired to rHn Forge pro
grams in parallel on the ABB
controller.
ReqHired on a PC to config
Hre the ABB controller and
control hardware.
MinimHm controller version
sHpported uy Forge/O.
Supplier
ABB Rouotics