Related Manuals for Pico Macom PCFM
Summary of Contents for Pico Macom PCFM
- Page 1 PCFM Manual.qxd 7/10/03 1:13 PM Page 1 PCFM Agile FM Stereo Audio Modulator Installation and Operation Manual Operation www.picomacom.com Ph: 800-421-6511 Manual Rev. 07/03...
-
Page 2: Product Inspection
To insure proper installation and operation, take a moment to read this guide before proceeding with the installation. If you have any questions or comments about the PCFM Stereo Audio Modulator, please contact your dealer or have him contact the PICO MACOM Service Center at these phone numbers: 800-421-6511, 818-493-4300. - Page 3 PCFM Manual.qxd 7/10/03 1:13 PM Page 3 11. Power Sources: This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your appli- ance dealer or local power company.
- Page 4 The PCFM provides up to 35dBmV output across the FM band (88-108 MHz). The unit is easily tuned by using channel up/down buttons and the digital display located on the front panel.
-
Page 5: Specifications
PCFM Manual.qxd 7/10/03 1:14 PM Page 5 PCFM Agile FM Stereo Audio Modulator RF OUT Audio Frequency Range: Frequency Resolution: Frequency Stability: Audio Bandwidth: Audio S/N: Audio Separation: RF Output Level: RF Level Adjustment: POWER FREQ. MONO STEREO Front View... -
Page 6: Operation And Controls
PCFM Manual.qxd 7/10/03 1:14 PM Page 6 Operation and Controls PCFM PCFM Agile FM Stereo Audio Modulator Front Panel Control Power Indicator: The LED indicates unit is operating. Station Display: Seven-segment display indicates FM frequency. Freq. Select Controls: Push these buttons to change channel to higher or lower frequency. -
Page 7: Installation Procedure
Measure the aural carrier level of the PCFM and a djacent channels. 10. Adjust the Output level of the PCFM to 7 to 12dB below adjacent channel video carrier levels by adjusting the RF OUTPUT adjustment on the front panel of the PCFM. -
Page 8: Warranty
We will issue an invoice for the List Price of the loaner unit plus shipping costs. When you receive the loaner unit, pack the failed unit in the loaner unit’s box and ship it freight prepaid to Pico Macom for repair. When you receive the repaired unit, a new RMA number will be provided in the box. Carefully pack the loaner unit and affix the new RMA number on the box and ship it back to us for full credit excluding shipping costs.